How do I use this pouch?

Silver-Bond X1 Electrically Conductive Silver Filled Adhesive Thermally Conductive Silver Epoxy Fast dry 4 hours

$19.99

Shipping:

Calculated at checkout

* Size:

2.5gm pouch(s)

Quantity:

TDS
Product Review
Find Similar Products by Category

Product Description

Electrically Conductive Silver Filled Adhesive Thermally Conductive Silver Epoxy Fast dry 4 hours

PRODUCT DESCRIPTION:

Silver-Bond X1 Electrically Conductive Silver Filled Adhesive Thermally Conductive Silver Epoxy Fast dry 4 hours is a two parts electrically and thermally conductive epoxy specially designed for fast 4 hour cure time. It has a work time of 5 minutes therefore the mixing and application must be performed quickly, This product is characterized by a wide operating temperature range from 20 to +200F. Electro-Bond X1 is recommended for thermal and electrical application for production environments due to its faster bodning time and excellent shear strength.

GENERAL PROPERTIES

Appearance	Silver
Cure Type	Heat cure and Room temperature
Benefits	Free of solvents and copper or carbon additives Coatings between many different and dissimilar materials
Mix Ratio by weight	90:100 / Resin:Hardener
Substrates	Metal, ceramics, glass and plastic
Typical Application	Assembly and repair of electrical modules, flexible circuits, membrane switches, wave guides, flat cable and high frequency shields Electronic bonding, coating, and sealing applications Can be used as a flexible "cold-solder"

CURE SCHEDULE

2 to 4 hours	@ 25C
10 minutes	@ 60C

UNCURED PROPERTIES

Specific Gravity, mixed	2.64 g/cc
Pot Life	6 min
Solid Content	100 %
Viscosity	Paste

MISC PROPERTIES

Hardness, Shore D	83
Adhesive Bond Strength Lap shear, alum to alum	9400

ELECTRICAL PROPERTIES

Volume Resistivity	1.00 E-03

THERMAL PROPERTIES

Operating Temperature	From -20 to +200F
Glass Transition Temp, Tg	60

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded. Please mix thoroughly and be ready to apply as the product begins to dry within 3 to 5 minutes.

2) Apply Silver-Bond X1 Electrically Conductive Silver Filled Adhesive Thermally Conductive Silver Epoxy Fast dry 4 hours completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.