Stone-Bond 1 Hour Cure Strongest Industrial Grade Epoxy Adhesive Quickly Hardens is an exceptional epoxy formulation recommended for lower temperature or wet industrial bonding applications where FAST CURING is required.
Stone-Bond 1 Hour Cure Strongest Industrial Grade Epoxy Adhesive Quickly Hardens is versatile two-part epoxy system contains no solvents, mixes easily at room temperature, and is suitable for high performance structural bonding applications where the combination of very fast room temperature curing coupled with low shrinkage and excellent mechanical and electrical properties is needed.
Stone-Bond 1 Hour Cure Strongest Industrial Grade Epoxy Adhesive Quickly Hardens develops strong, tough bonds to metals, plastics, concrete, sheetrock, marbel, stone, rock, tile, plaster, cement, glass and glass fabrics, hardboards and forestry products, ceramics, rubber, masonry materials, and other construction materials.
Stone-Bond 1 Hour Cure Strongest Industrial Grade Epoxy Adhesive Quickly Hardens is an excellent electrical insulator, and provides superior resistance to vapors and gases, water, galvanic action, petroleum fuels, salt solutions, and many other organic and inorganic compounds.
Stone-Bond 1 Hour Cure Strongest Industrial Grade Epoxy Adhesive Quickly Hardens develops significant properties 1 hour after mixing. However, an extended cure of 4-6 hours at 25C is required for fully matured bonds.
Note: Stone-Bond 1 Hour Cure Strongest Industrial Grade Epoxy Adhesive Quickly Hardens develops a high exotherm. Use immediately after mixing. The exothermic reaction begins within 2 minutes after initiating the mixing step, so have everything ready before mixing.
Slight haze/ slight straw
Room temperature or Heat cure
Resistant to many organic/inorganics Strong bond strength Great electrical insulator Durable
Mix Ratio by weight
100:100 / Resin:Hardener
metals, plastics, concrete, sheetrock, tile, marble, stone, rock, plaster,cement,glass fabrics, wood, leather and rigid plastics
-60 to 110 C
Anything requiring the unique properties this adhesive offers
Viscosity @ 25 C, mPas (cP)
Specific Gravity, mixed
33.3 in/in-F@ RT
Hardness, Shore D
Glass Transition Temp, Tg
25.0 C, 77.0 F
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1) Carefully clean and dry all surfaces to be bonded.
2) Apply Stone-Bond 1 Hour Cure Strongest Industrial Grade Epoxy Adhesive Quickly Hardens completely mixed adhesive to theprepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
4) Some ingredients in this formulation provided maycrystallize when subjected to low temperature storage. Agentle warming cycle of 52C for 30 minutes prior to mixingcomponents may be necessary. Crystallized epoxycomponents do not react as well as liquid components andshould be re-dissolved prior to use for best results.
This epoxy can be supplied in various different packages.