behars Loading... Please wait...

Strong-Bond 03 Low Vapor Pressure, Medium Viscosity, Room Temperature Cure (24hr)

$3.99
Shipping:
Calculated at checkout
Quantity:

Product Description

MEDIUM VISCOSITY / LOW VAPOR PRESSURE EPOXY ADHESIVE


PRODUCT DESCRIPTION:

Strong-Bond 03 Low Vapor Pressure, Medium Viscosity, Room Temperature Cure (24hr) is a clear, near transparent, medium viscosity epoxy adhesive formulation developed for rigid laminating, sealing and bonding applications where the combination of good wetting and improved mechanical electrical properties is required.

Strong-Bond 03 Low Vapor Pressure, Medium Viscosity, Room Temperature Cure (24hr) is two-part liquid epoxy adhesive contains no solvents and is easy to mix, use and apply at room temperature.

Strong-Bond 03 Low Vapor Pressure, Medium Viscosity, Room Temperature Cure (24hr) develops strong, rigid, high performance bonds to itself and to ceramics, glass and glass fabrics, metals, laminates and other composite materials, forestry and masonry products, and to most rigid plastics.

Strong-Bond 03 Low Vapor Pressure, Medium Viscosity, Room Temperature Cure (24hr) is an effective electrical insulator, and further provides excellent resistance to weather, galvanic action, vapors, JP4 fuel, gasoline, lubricants and other petroleum products, mild acids and alkalis, salts, and other organic and inorganic compounds.

GENERAL PROPERTIES

Appearance Slight haze/Clear
Cure Type Room temperature or Heat Cure
Benefits Good wetting
Great mechanical properties
Great electrical properties
Solvent free
Easy mix and apply
Mix Ratio by weight 100:25 / Resin:Hardener
Substrates Ceramics, glass to glass, fabrics, metals, laminates and other composite materials
Operating Temperature -60 to 125 C
Typical Application rigid laminating, sealing and bonding applications where the combination of good wetting and improved mechanical electrical properties is required.

UNCURED PROPERTIES:

Specific Gravity 1.2
Reactive solids contents, % 100
Pot Life 20 minutes

CURE SCHEDULE:

4 hours @ 65C
24 hours @ 25C

MISC PROPERTIES:

Volume Resistivity 6.00e+13 ohm-cm
Dielectric Constant 4.1
Dielectric Strength 420 kV/in
Hardness, Shore D 85

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply Strong-Bond 03 Low Vapor Pressure, Medium Viscosity, Room Temperature Cure (24hr) is completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

TDS | SDS

Back to Top